Shelly Bypass
Overview
Under certain circumstances, it is necessary to use a bypass. This means that if loads or lights with less than 20 W are used, it is recommended to use the Shelly Bypass to avoid possible interference.
Various connection diagrams can be found in the product images!
The Shelly ByPass is required when a Shelly 1L or a Shelly Dimmer 2 is installed without neutral conductor and the connected loads do not meet the minimum load of 20W, e.g. LED bulbs that then "flicker".
This can be prevented by connecting the ByPass in parallel to the load.
This is the new version V2!
Power Supply:
Power Supply AC 230V ±10%, 50/60Hz
Dimensions:
Size 39mm x 23mm x 7mm
The deviation from the device dimensions is up to 0.5 mm. The deviation from the housing dimensions is up to 2 mm.
Technical Data
| Charging Current | Micro USB - 5V |
| Compatible with | Shelly 1L & Shelly Dimmer2 |
| Housing Dimensions | 39mm x 23mm x 7mm |
Scope of Delivery
- 1 x Shelly Bypass
- 1 x User Manual
