Professional DIN rail Z-Wave® shutter control with power measurement, 16 A per channel
For home and building automation with remote control of motorized shutters, roller shutters, blinds, or awnings. Can be mounted on a DIN rail in a fuse box. It is recommended to use only motors with electronic or mechanical limit switches.
- Control of the tilt position (angle) of the shutter slats
- Supports push buttons/momentary switches and toggle switches
- Power measurement
- Extremely low power consumption: < 0.3 W?
- Z-Wave frequency band: 868.4 MHz (CEPT countries)?
- Latest technology: Z-Wave 800 series
- Automatic setup with SmartStart
- Security 2 Authenticated for the highest level of security
- Supports over-the-air firmware updates
- Works with Z-Wave certified gateways and over 4,000 Z-Wave devices
*A gateway (smart hub) is not included but is required to configure the device.
WHY CHOOSE THE WAVE PRO SHUTTER??
The best solution for new residential buildings and commercial spaces
The Wave Pro Shutter is a relay that supports up to 16 A per channel. It is equipped with an integrated power meter that allows you to control and monitor the consumption of each channel. Various actions, scenarios, and schedules can be set to align your environment with your daily activities or business needs.
INTRODUCTION TO Z-WAVE
Shelly Qubino works with Z-Wave
By using Z-Wave, smart home products can communicate seamlessly with each other thanks to a central smart hub - regardless of their brand or platform! Shelly Qubino devices operate with the latest Z-Wave chip generation (S800), one of the world's most popular standardized technologies for smart homes.
*Z-Wave devices must meet certain requirements to function correctly. This includes, for example, using a supported Z-Wave hub. For more information, visit the official Z-Wave website: www.z-wave.com
Works with any Z-Wave gateway
The Wave-Pro series is designed for installation on the DIN rail in the fuse box. After installation, you can integrate it into your Z-Wave network (a Z-Wave gateway is required) and control the connected devices from anywhere with your smartphone or tablet. Shelly Qubino devices work with over
4000 Z-Wave certified devices and gateways combined.
HIGHEST SAFETY
Wave Pro series
The Wave Pro series is equipped with overheat, overload, and surge protection* and is installed in the fuse box (DIN). The Pro series enables full smart automation without additional cables or wiring and is perfect for homes, offices, shops, businesses, production facilities, and new buildings.
* Overcurrent and surge functions are only available for devices with power measurement.
Features
Z-Wave controlled
Integrate the Wave Pro Shutter into your Z-Wave network and control it remotely. It is compatible with all certified Z-Wave gateways.
Slat angle control
Use the Wave Pro Shutter with your blinds and control the tilt position (angle) of the slats to regulate the amount of light in the room.
Position control??
Set the desired position of your blinds, shutters, umbrellas, awnings, and other devices powered by bidirectional AC motors.
Associations
Set up direct communication between devices in your local Z-Wave network and trigger custom actions, even without a hub!
Smart schedules?
Create custom schedules based on your daily routine or synchronized with sunrise and sunset (gateway required).
Smart scenes
Combine the Wave Pro Shutter with other Z-Wave devices (gateway required) and set custom scenes.
Technical data
| Power supply: | 110-240 V AC, 50/60 Hz |
|---|---|
| Device power consumption: | < 0.3 W |
| Power measurement (W): | Yes |
| Max. switching voltage AC: | 240 V |
| Max. switching current AC: | 16 A per channel |
| Overheat protection: | Yes |
| Overload protection: | Yes |
| Surge protection: | Yes |
| Range: | Up to 40 m indoors (depending on local conditions) |
| Z-Wave repeater: | Yes |
| CPU: | Z-Wave S800 |
| Z-Wave frequency bands: | 868.4 MHz |
| Maximum transmitted radio frequency power in frequency band(s): | < 25 mW |
| Size (H × W × D): | 94 x 19 x 69 ±0.5 mm / 3.7 x 0.75 x 2.71 ±0.02 inch |
| Weight: | 75 g |
| Mounting: | DIN rail |
| Screw terminal max. torque: | 0.4 Nm / 3.5 lbin |
| Cross-section of conductor: | 0.5 to 2.5 mm² / 20 to 14 AWG (green terminals) 0.5 to 1.5 mm² / 20 to 16 AWG (white terminals) |
| Length of stripped conductor: | 6 to 7 mm / 0.24 to 0.28 inch (green terminals) 5 to 6 mm / 0.20 to 0.24 inch (white terminals) |
| Housing material: | Plastic |
| Color: | Black |
| Ambient temperature: | -20 °C to 40 °C |
| Humidity: | 30 % to 70 % relative humidity |
| Max. height: | 2000 m |
